Gate TREND, panel Kaseton

All Gerda gates are provided with a complete set of components, necessary for their assembly, set up and use.
Gate opening is manual, using a handle and a rope.
The standard gate equipment includes:

• a leaf, made of panels with different heights, together with lateral caps, lower and upper end separator profiles and seals
  additional sealing plugs to be sued under the lateral caps at S, M and L panel joints
• a set of guide rails with lateral seals and a horizontal lintel strip with a sealing
  elements which support the manual gate leaf after its opening
• a complete, ready-for-assembly system of springs, cable and gate leaf relieving mechanisms
• a set of brackets with running rollers and intermediate hinges
• a complete set of galvanised fasteners and brackets for gate assembly
• a telescopic suspension system of the horizontal guide rails to Nmax = 300 mm
• a handle to raise/lower the gate leaf
• a spring slider (bar)
• a rope for manual gate raising

All Gerda gates are provided with a complete set of components, necessary for their assembly, set up and use.
Gate opening is manual, using a handle and a rope.
The standard gate equipment includes:

• a leaf, made of panels with different heights, together with lateral caps, lower and upper end separator profiles and seals
  additional sealing plugs to be sued under the lateral caps at S, M and L panel joints
• a set of guide rails with lateral seals and a horizontal lintel strip with a sealing
  elements which support the manual gate leaf after its opening
• a complete, ready-for-assembly system of springs, cable and gate leaf relieving mechanisms
• a set of brackets with running rollers and intermediate hinges
• a complete set of galvanised fasteners and brackets for gate assembly
• a telescopic suspension system of the horizontal guide rails to Nmax = 300 mm
• a handle to raise/lower the gate leaf
• a spring slider (bar)
• a rope for manual gate raising

1. Panel
2. Nakładka boczna
3. Wspornik górny z rolką
4. Wspornik boczny z rolką
5. Wspornik dolny z rolką
6. Zawias środkowy
7. Profil końcowy (górny)
8. Uszczelka (dół)
9. Uchwyt
10. Zasuwa
11. Profil kątowy
12. Profili przedni (listwa maskująca)
13. Uszczelka
14. Prowadnica
15. Łuk wzmocniony
16. Zespół prowadnic poziomych
17. Profil C
18. Płytki łączące
19. Wspornik listwy dystansowej
20. Zawieszenie teleskopowe
21. Wspornik
22. Ogranicznik
23. Płytka do regulacji napięcia sprężyny
24. Zaczep sprężyny
25. Wspornik
26. Sprężyna wewnętrzna i zewnętrzna

WYPOSAŻENIE STANDARDOWE

The standard equipment includes an electric drive system with a control unit, a rail and a double-channel system for remote gate control. Depending on the actual needs, the standard equipment offers the following two drive options: Tiziano and Bottucelli 800.

Tiziano drive

• Electric supply:: 230 V +/- 10% 50 Hz
• Motor: 24V
• Power input:: 100 W
• Force: 600 N
• Opening speed: 6,6 m/min.
• Operating temperature: from -20 degrees C to + 60 degrees C
• Operation mode: 20 cykli/dobę
• Max gate height: 2300 with a 3020 mm rail, 2950 with a 3620 mm rail
• Max gate area: 10 m2

Bottucelli 800 drive

• Electric supply: 230 V +/- 10% 50 Hz
• Motor: 24V
• Power input: 180 W
• Force: 800 N
• Opening speed: 5 m/min.
• Operating temperature: from -20 degrees C to + 60 degrees C
• Operation mode: 60 cycles/day
• Max gate height: 2300 with a 2900 mm rail, 2900 with a 3500 mm rail
• Max gate area: 13 m2

ADDITIONAL EQUIPMENT

• Surface-mounted photocell
• MITTO B4 remote control
• MITTO VINEYARD remote control
• KLEIO 2 remote control
• KLEIO 4 remote control
• CLONIX2 E receiver
• RADIUS B lamp
• Key switch
• Supply batteries
• External unlocking mechanism
• Rail extension
• Wireless keyboard