Panel M

• Panel thickness 45 mm
• Thermal insulation 1.06 W / (m2K)
• The thermal transmittance is equal to a brick wall 65 cm thick
• Roller supports and hinges are made of galvanized steel
• Possibility to order a gate mounted in the opening
• Two types of springs: tension and torsion (25,000 cycles = 17 years)
• Maximum available door size: 6000 x 3000 mm (width x height)
• 5-year warranty

All Gerda gates contain a set of elements necessary for their installation, commissioning and full use. The gate is opened manually with a handle and a rope. Standard equipment includes:

• The leaf consists of panels of different heights with side covers, upper and lower end profiles and seals
• Additional sealing plugs under the side covers at the joint of S, M and L panels
• A set of rails with side seals and a horizontal lintel strip with a seal.
• Elements supporting the leaf of a manual gate after opening
• Complete, ready-to-install system of springs, cables and mechanisms that relieve the door leaf.
• Set of supports with rollers and intermediate hinges
• A complete set of galvanized fasteners and brackets for door assembly
• System of telescopic suspension of horizontal guides up to N max = 300 mm
• The handle for lifting and lowering the sash
• Spring-loaded bolt
• Rope for manual door lifting

All Gerda gates, in addition to standard equipment providing a complete set of elements necessary for installation, commissioning and full use of the door, also have additional equipment (optional) depending on the customer’s requirements and needs. The additional equipment includes:

• The cable unlocking the drive from the outside to the locking lock with the key.
• A bolting lock with an insert adapted to work with an electric drive. In the event of a power failure, it enables the drive to be unlocked and the gate to be opened.
• Electric drive of the Gerda OPENER gate that allows you to open it with a remote control (without having to get out of the car) with the simultaneous function of lighting the interior of the garage.
• A mechanism that facilitates manual lifting / lowering of the gate, the so-called block with a disc.
• Recommended for gates over 2 m high and a leaf area of ​​up to 15 m2.
• A set of masking elements with fixing elements for mounting the gate in the opening.
• Glazing available in various sizes and shapes (rectangular and oval. Only available in the Microwave and S panels). Glazing cannot be installed in the lower and upper door sections, and in the second section from the bottom, if a lock is installed.
• Adjustable ventilation grilles in white or black. The installation of the grilles is not possible in the Cassette-type panels, in the highest segment of the door, segments with glazing, and also in the second segment from the bottom, if a lock is installed.
• Telescopic suspension (for N> 300 mm) for mounting heights N 500 mm, 800 mm, 1000 mm and 1500 mm