Gate CLASSIC, panel L

All Gerda gates are provided with a complete set of components, necessary for their assembly, set up and use.
Gate opening is manual, using a handle and a rope.
The standard gate equipment includes:

• a leaf, made of panels with different heights, together with lateral caps, lower and upper end separator profiles and seals
  additional sealing plugs to be sued under the lateral caps at S, M and L panel joints
• a set of guide rails with lateral seals and a horizontal lintel strip with a sealing
  elements which support the manual gate leaf after its opening
• a complete, ready-for-assembly system of springs, cable and gate leaf relieving mechanisms
• a set of brackets with running rollers and intermediate hinges
• a complete set of galvanised fasteners and brackets for gate assembly
• a telescopic suspension system of the horizontal guide rails to Nmax = 300 mm
• a handle to raise/lower the gate leaf
• a spring slider (bar)
• a rope for manual gate raising

Apart from the standard equipment with a complete set of elements, necessary for assembly, set up and use of the gates, they can also be provided with additional (optional) accessories, depending on customer’s requirements and needs. The additional gate equipment includes:

• a string to unlock the outer drive mechanism to the lock with a key.
• a locking system with an insert, adapted for use with an electric drive mechanism.
  In case of power failure, it enables to unlock the locking drive mechanism and open the gate.
• an electric drive for the Tiziano or Bottucelli 800 gates, enabling their opening with a remote (i.e. without the need to get off the car) with a simultaneous garage inside lighting function.
• a mechanism for manual gate raising/lowering – the, so-called, block with a pulley
  It is recommended in gates with height above 2 m and leaf area till 15 sq. m.
• a set of cover elements with fasteners to mount the gate in its gantry opening.
• Glazing systems, available in various dimensions and shapes (rectangular and oval)
  (applied in Mikrofala and S panels only).
  Glazing assemblies are excluded in lower and upper gate segments, as well as in the second segment from the bottom, when a lock is mounted.
• white or black, controlled ventilation grills.
  Ventilation grill assemblies are excluded in coffer-type panels, in top gates panels, in segments with glass panes, as well as in the second segment from the bottom, when a lock is mounted..
• a telescopic suspension system (for N > 300 mm) for assemblies with height N of 500 mm, 800 mm, 1000 mm and 1500 mm.

1. Panel
2. Lateral cap
3. Upper bracket with a roll
4. Lateral bracket with a roll
5. Lower bracket with a roll
6. Middle hinge
7. End profile (upper)
8. Seal (bottom)
9. Handle
10. Slider
11. Angular profile
12. Front profile (a cover strip)
13. Seal (bottom)
14. Guide rail
15. Strengthened arc
16. Set of horizontal guide rails
17. C profile
18. Flat brackets
19. Distance rail bracket
20. Telescopic suspension system
21. Bracket
22. Limiter
23. Spring tension control plate
24. Spring hook
25. Bracket
26. Internal and external spring

STANDARD EQUIPMENT

The standard equipment includes an electric drive system with a control unit, a rail and a double-channel system for remote gate control. Depending on the actual needs, the standard equipment offers the following two drive options: Tiziano and Bottucelli 800.

Tiziano drive

• Electric supply:: 230 V +/- 10% 50 Hz
• Motor: 24V
• Power input:: 100 W
• Force: 600 N
• Opening speed: 6,6 m/min.
• Operating temperature: from -20 degrees C to + 60 degrees C
• Operation mode: 20 cykli/dobę
• Max gate height: 2300 with a 3020 mm rail, 2950 with a 3620 mm rail
• Max gate area: 10 m2

Bottucelli 800 drive

• Electric supply: 230 V +/- 10% 50 Hz
• Motor: 24V
• Power input: 180 W
• Force: 800 N
• Opening speed: 5 m/min.
• Operating temperature: from -20 degrees C to + 60 degrees C
• Operation mode: 60 cycles/day
• Max gate height: 2300 with a 2900 mm rail, 2900 with a 3500 mm rail
• Max gate area: 13 m2

ADDITIONAL EQUIPMENT

• Surface-mounted photocell
• MITTO B4 remote control
• MITTO VINEYARD remote control
• KLEIO 2 remote control
• KLEIO 4 remote control
• CLONIX2 E receiver
• RADIUS B lamp
• Key switch
• Supply batteries
• External unlocking mechanism
• Rail extension
• Wireless keyboard